Estima parts here in Auz, regular maintenance on the car and rear seat removal.
Page 1 of 1
Estima parts here in Auz, regular maintenance on the car and rear seat removal.
This is the rear seat; the mid seat/seats are the same but with a small semi square plastic caps over the bolt head to undo.
Use a smooth knife, not screw diver, to open plastic seem.
Exposed bolt to undo, 4 for each seat.
Cable ends, there is one each end!
Twist end and out it comes.
Seat off track
Track can be taken all the way to the front and locked in place or left at the rear like i have, mine has been sitting around for two years so the metal needs a little lube. The track should be protected, as there is a lever on it!
Rear of car open with seat gone.
-----------------------------------------------------------------------------------
Use a smooth knife, not screw diver, to open plastic seem.
Exposed bolt to undo, 4 for each seat.
Cable ends, there is one each end!
Twist end and out it comes.
Seat off track
Track can be taken all the way to the front and locked in place or left at the rear like i have, mine has been sitting around for two years so the metal needs a little lube. The track should be protected, as there is a lever on it!
Rear of car open with seat gone.
-----------------------------------------------------------------------------------
Last edited by liquidg on 5th November 2022, 12:26 am; edited 2 times in total
_________________
Forum Admin
liquidg- Posts : 2782
Join date : 2010-02-02
Location : Brisbane bayside
Rear shock absorbers for estima with the 3 litre lexus engine.
From Repco here in Auz
Monroe OESpectrum 37284 ST 28-83677
P 12339 R3 made in USA
Monroe OESpectrum 37284 ST 28-83677
P 12339 R3 made in USA
_________________
Forum Admin
liquidg- Posts : 2782
Join date : 2010-02-02
Location : Brisbane bayside
Brake pads and rotors for estima
Brakes for the 2001 to 2005
Part numbers for these----
Front Rotor 4351258011
Rear Rotor 4243128091
Front pad 0446528510
Rear Pad 0446628080
Part numbers for these----
Front Rotor 4351258011
Rear Rotor 4243128091
Front pad 0446528510
Rear Pad 0446628080
_________________
Forum Admin
liquidg- Posts : 2782
Join date : 2010-02-02
Location : Brisbane bayside
How to adjust foot park break by ( Minh )
Jack car up
Remove rear wheel
You will see little circle rubber grommet.
Remove it.
Spin hub until you see a little gear.
Flick up to loosen
Flick down to tighten.
How tight? Until you can spin the hub about quarter to half turn on its own.
Any tighter. On highway you'll get heat high point vibration
Remove rear wheel
You will see little circle rubber grommet.
Remove it.
Spin hub until you see a little gear.
Flick up to loosen
Flick down to tighten.
How tight? Until you can spin the hub about quarter to half turn on its own.
Any tighter. On highway you'll get heat high point vibration
_________________
Forum Admin
liquidg- Posts : 2782
Join date : 2010-02-02
Location : Brisbane bayside
Similar topics
» Boat trailer hitting car rear bumper protection.
» phosphates removal/control
» Estima 3 litre 6 cylinder servicing in Brisbane’s south side!
» Phosphate removal-Carib sea phos buster pro
» Gill isopod removal from reef aquarium fishes gills.
» phosphates removal/control
» Estima 3 litre 6 cylinder servicing in Brisbane’s south side!
» Phosphate removal-Carib sea phos buster pro
» Gill isopod removal from reef aquarium fishes gills.
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum